FISCHER FISCHERSCOPE X-RAY XDLM 231, Operator'S Manual

Page: 42 / 236

40 FISCHERSCOPE ® X-RAY
User Interface of the WinFTM Software
6.4.1 Large Number Presentation
In this display mode the current measurement value (or the last values, if several characteristics are
measured) is displayed in large digits. In addition to the measurement value, the measurement un-
certainty is displayed as well. The measurement uncertainty depends on the measurement condi-
tions (measurement time, measurement distance, measurement application).
If you have set up tolerance limits, the measurement value is displayed with colored background.
If the measurement value is within the tolerance limits, the measurement value is displayed on green
background, otherwise on red background.
6.4.2 List Presentation
The list of measurement values are presented in the order of the measurements. In addition to the
measurement values, the date and time, the name of the operator and the tolerance limits are dis-
played as well. The name of the operator and the tolerance limits are displayed, if they were pre-
viously entered.
If you have set up tolerance limits, the measurement value is displayed with colored background.
If the measurement value is within the tolerance limits, the measurement value is displayed on green
background, otherwise on red background.
6.4.3 SPC Chart Presentation
In this display mode the SPC chart (Statistical Process Control chart) is displayed in the statistics
field. The measurement values are displayed in the list presentation in the measurement value field.
Within the statistical process control chart you can identify trends in automated measuring proce-
dures with large lot sizes. Thus, you can easily determine changes with regard to coating thickness