FISCHER FISCHERSCOPE X-RAY XDLM 231, Operator'S Manual

Page: 215 / 236

FISCHERSCOPE ® X-RAY 213
Features of WinFTM BASIC and LIGHT
2.9 Further Features of WinFTM
Function Description
Standard Windows ® user
interface
Users with basic knowledge of Windows ® will very quickly be fa-
miliar with the program’s user interface.
Product functions You can set up, select, delete, edit and copy products.
Additionally, you can search for products, using different search
criteria.
Definition of the spectral
background In the Def.MA (Definition of the Measurement Settings of the Appli-
cation) the spectral background can be defined. This function in-
creases the accuracy of the analysis as long as a suitable
underground spectrum is available.
Multiple Excitation For each application, the excitation parameters “high voltage”
and “primary filter” are set to produce the best possible results. For
some applications, however, it may be necessary to work with dif-
ferent excitations in order to measure all parameters optimally.
You can use multiple excitations within a single measurement, so
that all parameters are measured under the best possible condi-
tions; the collected results are then presented in one combined
evaluation.
Application example: Determination of the thickness of a NiP
coating with simultaneous determination of the Phosphorus
concentration
Control field and joystick
on the measuring head
(joystick on models with
motor-driven XY-stage only) In addition to the operation via the Software WinFTM you can con-
trol program and instrument functions with the control field and the
joystick on the measuring head.
Automatic searching and
selecting of products
(option) You can search for products by name (designation) using a bar-
code reader. An optional bar-code keyboard (order no. 602-296)
with a bar-code reader pen (order no. 602-292) is available.
Short menu The supervisor can reduce the menu functions available for the op-
erator. In this manner, sensitive data such as measuring time and
calibration parameters can be protected from overwriting, and the
operator is presented with a simplified menu. The long menu with
full functionality is accessible only with a password.
Quick selection of products
and tasks You can select products and tasks quickly by using command but-
tons (on the monitor), which can be edited.
Additionally, you can allocate products or tasks to the keys of the
control field on the measuring head.
mq value (measurement
quality)
The mq value is a measure for the quality of a measurement result.
It is displayed for every measurement and allows for a plausibility
check of the result. The
mq value can be displayed or printed for
every individual result. A warning appears in case of a limit viola-
tion.