FISCHER FISCHERSCOPE X-RAY 5000 Series, Operator'S Manual

Page: 39 / 188

FISCHERSCOPE
®
X-RAY 39
Product WinFTM File Structure
6.3.1 Dual Function of a Product
A product consists of two parts that function independent of one another:
The parts have the following function:

The product part for the specimen is used to measure the specimens.

The product part for the calibration standard set 1 is used for the calibration or substi-
tute calibration and for the monitoring of the measurement devices.
The two different product parts are used to store, organize and evaluate the respective
measurement data separately.
To some degree, the WinFTM software permits differences in the composition between
the specimen and the calibration standards, both for the substrate material and for the
coating(s). The different compositions are defined in the respective Def.MA of the two
product parts and can be evaluated in any desired way using the functions of block
evaluation and final evaluation. In this manner, the measurement data that has been taken
at the actual specimen, using the product part for the specimen, will remain uninfluenced
when the calibration standards are re-measured.
The dual function is also implemented in the Def.MA and measurement application files.
From the user’s point of view mainly the dual function of the product file is important.
1. In this context a calibration standard set is a particular data set, which contains the characteristics of
the used calibration standards.
Product part for the specimen
Product part for the cali-
bration standard set
1
Product