FISCHER FISCHERSCOPE X-RAY 5000 Series, Operator'S Manual, Page: 27 / 188

FISCHERSCOPE
®
X-RAY 27
Statistics Field User Interface of the WinFTM Software
5.3 Statistics Field
The statistical results of the last block are displayed in this field (see Fig. 5-1 on Page 23).
A block is a test series. The test series has a first and a last value. The last value marks
the end of the block. An additional measurement value belongs to the next test series.
The following features of a block are displayed in the statistics field: Number of the block,
Mean value, Standard deviation, Coefficient of variation, Number of measurements, Order
no. and Operator.
5.4 Measurement Value Field
This field either displays the last measurement value or a list of all measurement values
acquired with the current product.
You can choose between three different display modes:

Large number presentation

List presentation

SPC chart presentation (Statistical Process Control Chart)
5.4.1 Large Number Presentation
In this display mode the current measurement value (or the last values, if several charac-
teristics are measured) is displayed in large digits. In addition to the measurement value,
the measurement uncertainty is displayed as well. The measurement uncertainty depends
on the measurement conditions (measurement time, measurement distance, measure-
ment application).
If you have set up tolerance limits, the measurement value is displayed with colored back-
ground. If the measurement value is within the tolerance limits, the measurement value is
displayed on green background, otherwise on red background.
5.4.2 List Presentation
The list of measurement values are presented in the order of the measurements. In addi-
tion to the measurement values, the date and time, the name of the operator and the toler-
ance limits are displayed as well. The name of the operator and the tolerance limits are
displayed, if they were previously entered.