FISCHER FISCHERSCOPE X-RAY 5000 Series, Operator'S Manual, Page: 125 / 188

FISCHERSCOPE
®
X-RAY 125
Starting the Measurement Data Export Measurement Data Export
17 Measurement Data Export
You can export the measured values, their XYZ coordinates, statistical evaluations and
other data to other applications like spreadsheets, statistical evaluation tools or process
control systems.
All settings for the measurement data export are assigned to one product. For each
product, you can define different settings for the data export.
Basically there are two modes for exporting measurement data: online export and export
on demand.
17.1 Starting the Measurement Data Export
A simple data export in the Export on demand mode is described here to explain the
basics of data export.
Before you start
For the data export you need an export template that defines, which data will be exported
and their format. For a quick start you can use the simple export template, which comes
with the WinFTM installation. But you do have the option to setup your own export
template according to your needs, see Chap. 17.3 on Page 128.
Procedure
1. To define the export settings, select in the WinFTM main menu
Evaluation > Export > Export Setup... .
The window Exporting Data appears.
Table 17-1: The two modes for exporting measurement data
Export mode Explanation
Online Export The measurement data (single readings, block statistics and header)
is exported continuously when measurement data is acquired by the
instrument.
Export on
demand The measurement data (single readings, block statistics and header)
will be exported, when you start the export by using the evaluation
dialog, after the measurements are performed.