FISCHER FISCHERSCOPE X-RAY 4000 Series, Operator'S Manual

Page: 48 / 170

Product Administration Assigning a new measurement application to a product
48 FISCHERSCOPE
®
X-RAY
7.6 Assigning a new measurement application
to a product
A new measurement application can be assigned to an existing
product only if it has the same measurement mode as the existing
measurement function. Changes performed in the measurement
application, are effective in all products linked with this
measurement application
Procedure
1. Select in the WinFTM main menu
Product > Modify
.
The window Modify product appears.
2. Select the tab
Application
.
3. Click
Other Application
.
The window Modify application appears.
4. Select the application and click
OK
.
7.7 Modifying a measurement application
The following steps are required to change a measurement
application:
"Calibrate > Modify application" > selection of the desired
measurement application from the list of all existing measurement
applications with mouse click [OK] > changing the parameters in
accordance with the operating instruction Basic Software > [OK]:
the new parameters are transferred.
7.8 Copying a measurement application
The following steps are required to copy a measurement
application:
"Calibrate > Copy application" > click on the desired application >
input of a new name or transfer of the suggestion > input of a new
number (the next new available number is suggested) > [Copy]: the
new measurement application is created.