FISCHER FISCHERSCOPE X-RAY 4000 Series, Operator'S Manual

Page: 47 / 170

Modifying a product Product Administration
FISCHERSCOPE
®
X-RAY 47
File… .
The window Copy from/to file appears.
4. Select the tab File >>> Product .
5. Click Select .
The window Select file appears.
6. Select the product file and click Select .
The selected path appears in the field File .
7. Click Start copy .
The file will be copied. After this the report The product was
copied successfully appears.
8. Click OK .
9. To close the window, click cancel .
What you can do next
Before you can perform measurements using the new product, you
need to normalize or calibrate the product.
7.4 Modifying a product
Modify product Product-specific settings can be modified in the dialog window
“Modify product”.
Two options for opening the dialog window “Modify prod-
uct”:

Menu command “Product > Modify”

Click the [Info] icon
7.5 Deleting a product
Delete product
Product files that are no longer needed can be deleted using the
menu command “Product > Delete” .
An open product file cannot be deleted.
A respective message will appear when you attempt to delete an
open product file. This message must be confirmed with [OK].