background image

 

1

 

FISCHER AMPS 

 
 

 

MANUAL  

DRUM IN EAR AMP

 2

 

 
Dear customer: 
You have decided to buy a FISCHER AMPS product. Thank you.  
 
Please read this manual carefully prior to the first use. These safety and operating instructions 
should be retained for future reference.  
 
Should you have further questions, please do not hesitate to contact 
FISCHER AMPS. 
 
 
Product Description: 
 
The Drum In Ear Amp 2 has been developed  for supplying in ear systems of drummers. Most drummers 
need additional bass support to get the feeling for the beat of the bass drum while using in ear monitoring.    
Using  a  bass  shaker  which  is  mounted  to  the  drummer  seat  allows  to  feel  the  bass  without  noise.  The 
Drum In Ear Amp 2 in combination with the corresponding bass shaker is a low-cost monitoring solution for 
drummers  with  high  demands.  The  supplied  mounting  bracket  allow  direct  fastening  to  the  drum  set  for 
convenient control.  
 
 
 
Basic information on the use of in-ear monitoring systems:  
 
Caution: 
Using this system at too high sound levels may cause permanent hearing defects. Adjust the 
volume so that you can hear sufficiently. Ringing in the ears can indicate that the adjusted 
hearing level is too high. Use headphone systems with good fitting which suppress the 
ambient noise well. This allows that the required listening volume can be low which is kind to 
your ears.  
 
 

 

 

Summary of Contents for DRUM IN EAR AMP 2









Reviews: