background image

| Impressum

FISCHER Mess- und Regeltechnik GmbH

2 / 28

BA_EN_DE43

Impressum

Manufacturer:

FISCHER Mess- und Regeltechnik GmbH

Bielefelderstr. 37a
D-32107 Bad Salzuflen

Telephone: +49 5222 974 0
Telefax: +49 5222 7170

eMail: 

[email protected]

web: 

www.fischermesstechnik.de

Technical editorial team:

Documentation representative: T. Malischewski
Technical editor: R. Kleemann

All rights, also those to the translation, reserved. No part of this document may
be reproduced or processed, duplicated or distributed using electronic systems
or any other form (print, photocopy, microfilm or another process) without the
written consent of the company FISCHER Mess- und Regeltechnik GmbH, Bad
Salzuflen.

Reproduction for internal use is expressly allowed.

Brand names and procedures are used for information purposes only and do
not take the respective patent situation into account. Great care was taken
when compiling the texts and illustrations; Nevertheless, errors cannot be ruled
out. The company FISCHER Mess- und Regeltechnik GmbH will not accept any
legal responsibility or liability for this.

Subject to technical amendments.

© FISCHER Mess- und Regeltechnik 2018

Version history

Rev. ST4-A 11/18

Version 1 (first edition)

Summary of Contents for DE43





























Reviews: