Installation Instructions
9.12.14
Kapitel/Chapter 6: Installation Instructions - Seite/Page 69
6. Installation Instructions
Attention!
All connections (hoses, wires etc) and installation
instructions are designed and suited for “standard”
installation situations.
In situations where Fischer Panda has no detailed
information concerning certain installation requirements
(such as boot hull specifications, maximum boot speed -
and all other conditions concerning special operating
situations) the installation instructions should be used
as an example guide only.
The installation must be undertaken and proved by a
suitable qualified/trained person and may in accordance
with the law as required by the country and special
situation.
Damages caused by faulty or incorrect installation are not
covered by the warranty.
6.1
Personal requirements
The described installation must be done by a technical trained person or a Fischer Panda service point.
6.1.1 Hazard notes for the installation
Notice!:
see “Safety first!” on Page 10.
Follow the general safety instruction at the front of this
manual.
Warning!: Risk of injury
Working at a running generator can result in severe
personal injury. Therefore before starting work at the
generator:
Make sure that the generator ist stopped and the starter
battery is disconnected to guarantee that the generator
cannot be inadvertently started.
Do not run the generator with removed sound isolation cover.
Warning!: Risk of injury
Improper installation can result in severe personal
injuries or material damage.
• Always undertake installation work when the generator is
switched off.
• Ensure there is sufficient installation clearance before start
working.
• Ensure tidiness and cleanliness at the workplace. Loose
components and tools lying around or on top of each other
are sources of accidents.
