The Panda Generator
9.12.14
Kapitel/Chapter 5: The Panda Generator - Seite/Page 47
5.3
Details of functional units
5.3.1 Control panel
The control panel is fitted with various monitoring functions, which increase functional reliability and operating safety
of the generator. Various parts of the generator are monitored with sensors which, when triggered, generate an error
message and can shut down generator operation under certain circumstances to prevent damage.
Fig. 5.3.1-1: Control panel
Notice!:
See remote control panel data sheet for details!
01
02
03
04
11
12
14
15
13
05
06
07
08
09
10
01. LED for cooling water temperature red
1
02. LED for cooling water level red/yellow
1
03. LED for fuel level and air filter replacement red/yellow
1
04. LED for AC voltage ok green
1
05. LED for winding temperature red
1
06. LED for oil pressure red
1
07. Battery loading voltage DC charging light
08. LED for pre-heat, „heat“ orange
1
09. LED for generator „start“ green
1
10. LED for generator „stand-by“ green
1
11. Push-button for pre-heat, „heat“
12. Push-button for generator „start“
13. Operating hours counter
14. Push-button panel „off“
15. Push-button panel „on“
1
LED green: normal operating mode, LED red: fault, LED yellow:
warning, LED orange: active depending on jumper
