Fischer Panda Panda 4800i PMS, Manual, Page: 119 / 180

Generator Failure
14.2.13 Panda_4800i PMS_eng.R04 - Kapitel/Chapter 7: Generator Failure Seite/Page 119
7. Generator Failure
7.1 Personal requirements
The work described here, unless otherwise indicated, are performed by the operator.
More repair work may be performed only by specially trained personnel or by authorized repair shops (Fischer
Panda service points). This is especially for working on the valve timing, fuel injection system and the engine repair.
7.2 Safety instructions for this chapter
Notice!: see “Safety Instructions - Safety First!” on Page 17.
Also consider the general safety instructions at the first
pages of this manual.
Warning!: Automatic start Danger for life! - The generator can be equipped with a
automatic start device. This means the generator can be
started by an external signal. To avoid an unexpected
starting of the generator, the starter battery must be dis-
connected before start working at the generator.
Warning!: Risk of injury Working at a running generator can result in severe per-
sonal injury. Therefore before starting work at the gener-
ator:
Make sure that the generator is stopped and the starter bat-
tery is disconnected to guarantee that the generator cannot
be inadvertently started.
Do not run the generator with removed sound isolation cover.
Warning!: Risk of injury Improper installation/maintenance can result in severe
personal injuries or material damage.
- Always undertake installation/maintenance work when the
generator is switched off.
- Ensure there is sufficient installation clearance before start
working.
- Ensure tidiness and cleanliness at the workplace. Loose
components and tools lying around or on top of each other
are sources of accidents.
- Only perform installation work using commercially available
tools and special tools. incorrect or damaged tools can result
injuries.