Fischer Panda 5000i PVK-U, Manual

Page: 27 / 174

Basics
30.10.12 Panda_5000i_PVMV-N_Book_eng.R02 - Kapitel/Chapter 3: Basics Seite/Page 27
3. Basics
3.1 Intended use of the machine
The Fischer Panda generator is made to produce electrical energy out of diesel fuel.
The diesel fuel is converted to mechanical energy by the diesel engine. This mechanical energy drives the genera-
tor. In the genset, the mechanical energy is converted to electrical energy. This process is controlled by (sometimes
external) components, the remote control panel and the VCS (voltage control system).
Sufficient amount of fuel and combustion air is necessary for this process. Arising exhaust and heat must be con-
ducted according to the specification.
If the electrical power is fed to a local net, the regulations and installation instructions of the system operator and the
regional authorities with reference to the power network/shipboard power supply system must be respected. Safety
applications and safety devices (including lightening conductor, personal protection switch, ect.) have to be installed.
Misapplication of the product can damage and destroy the product and the electrical net inclusive all load which is
attached to the net, and contain hazards like short circuit, ect. It is not allowed to modify the product in any case.
Never open the sound cover during operation! The safety and hazard notes of the manual must be respected!
3.2 Purpose of the manual and description of the definitions of the trained
persons/operators/users
This manual contains the working instructions and operating guidelines for the owner and user of Fischer Panda
generators.
The manual is the base and the guideline for the correct installation and maintenance of Fischer Panda generators.
It does not substitute the technical evaluation and should be used as an example guide only. The installation must
be undertaken and proved by a suitable qualified/trained person and should be in accordance with the law as
required by the country and special situation. All work has to be undertaken according to the state of the technology.
3.2.1 Trained persons
Qualified persons for the mechanical components are motor mechanics or persons with similar qualifica-
tion and training.
Trained persons for the electrical components are electricians or persons with similar qualification and trai-
ning.
After the installation the trained person has to instruct the owner about the operation and maintenance of the gene-
rator. This must include the hazards of the generator use.
3.2.2 Operator
The operator is responsible for the operation of the generator.
After the installation, the operator must be instructed concerning the operation and maintenance of the generator.
This has to include the hazards during operation of the generator, different operating conditions, and instructions for
the maintenance.
The operator must read and follow the manual and must respect the hazard notes and safety instructions.
3.2.3 User