Fischer Panda 45i pms, User Manual

Page: 60 / 212

Installation Instructions
Seite/Page 60 - Kaptitel/Chapter 6: Installation Instructions 8.10.14
6.2.3 Advice for optimal sound insulation
Fig. 6.2.3-1: Generator base
The convenient base consists of a stable framework, on
which the generator is fastened by means of shock-
mounts. Since the aggregate is „free“ downwards, the
combustion air can be sucked in unhindered. In addition
the vibrations are void which would arise with a closed
capsule base.
6.3 Generator connections
Connect all electrical wires within the capsule tightly to the motor and the generator. This is also the case for fuel
lines and cooling water lines.
ATTENTION!: Danger to Life - High voltage
The electrical connections MUST be carried out according to
the respective valid regulations. This also concerns used cable
materials. The cable supplied is meant for laying "protected"
(i.e. in pipe) at a temperature up to a max of. 70°C (160°F). The
on-board circuit must also be fitted with all essential fuses.
Hinweis The following figures are represantive for a Fischer Panda
generator. To locate the original connection points, please
see the chapter „The Panda generator“.