Maintenance Instructions
Seite/Page 140 - Kaptitel/Chapter 9: Maintenance Instructions
9.12.14
Fig. 9.13.1.1-4: Fuel filter
3. Screw the new filter element into the mount.
4. Lubricate the sight glasses o-ring with a heat resistant
grease (Specification: Antiseize) and screw the sight
glass back into its mount (right hand rotation).
9.14 Checking the water separator in the fuel supply
Fig. 9.14-1: Pre-filter with water separator
The pre-filter with water separator has a cock underneath, by
which means the water can be drained.
This water sinks to the bottom, due to the difference in the
densities of water and fuel. Water is heavier than the diesel
Sample picture
9.14.1 Replace the air filter mat
Fig. 9.14-1: Air suction housing
1. Open the air suction housing by loosen the six screws on
the housing cover.
Use spanner size 8 mm.
