Fischer Amps DRUM INEAR AMP Manual Download Page 1

 

1

 

FISCHER AMPS 

 
 

MANUAL 

 

DRUM INEAR AMP 

 

 

Dear customer: 

You have decided to buy a 

Fischer Amps

  product. Thank you.  

 

Please read this manual carefully prior to the first use, you will get important in formation for 
use and safety of the unit. These safety and operating instructions should be retained for 
future reference.  
 
Should you have further questions, please do not hesitate to contact FISCHER AMPS
.  

 
 

Product Description: 

 
The Drum Inear Amp made by Fischer Amps has been developed for supplying In-Ear Systems of 
drummers. Especially drummers need additional support in the bass sector to have the feeling for the 
bass drum beat when using in-ear monitoring systems. When using a bass shaker which is mounted 
to the drummer throne the bass can be perceived impressively without noise. The Drum Inear Amp 
with the corresponding bass shaker is a low-cost monitoring solution for drummers with high demands. 
The supplied mounting bracket for the amplifier allows direct mounting to the drum set for convenient 
control.  
 
 
 

Basic information on the use of in-ear monitor systems: 

 

CAUTION:  

Using this system at too high sound levels may cause permanent hearing defects. Adjust the volume 
so that you can hear sufficiently. Ringing in the ears can indicate that the adjusted hearing level is too 
high. Use headphone systems with good fitting which suppress the ambient noise well. This allows 
that the required listening volume can be low which is kind to your ears.  

 

 

Summary of Contents for DRUM INEAR AMP









Reviews: