FISCHER AMPS
Manual
HARD-WIRED IN EAR BODY PACK XL
Dear customer:
You have decided to buy a
Fischer Amps
product. Thank you.
Please read this manual carefully prior to the first use, you will get important information for
use and safety of the unit. These safety and operating instructions should be retained for
future reference.
Should you have further questions, please do not hesitate to contact FISCHER AMPS.
Product Description:
The Body Pack XL has the same functional principle as the Fischer Amps Hardwired In Ear Monitor
Belt Pack plus an additional Mic-In to add-on a microphone signal to the stereo or mono mix received.
The integrated low-noise microphone preamp has standard features such as 48V phantom power,
PAD switch to reduce the input signal by 20 dB, and gain control from +12 dB to + 60 dB. An
additional feature for the microphone input is the parallel out which allows to loop the microphone
signal.
The Body Pack XL is powered with a 9V battery or a mains adaptor (not included).
This Body Pack is a compact in ear solution not only for orchestra musicians who want to mix their
own microphone signal to the incoming in ear signal, but it is also an excellent tool for engineers to
monitor microphone signals.
Basic information on the use of in-ear monitoring systems:
CAUTION:
Using this system at too high sound levels may cause permanent hearing defects. Adjust the
volume so that you can hear sufficiently. Ringing in the ears can indicate that the adjusted
hearing level is too high. Use headphone systems with good fit which suppress the ambient
noise well. This allows that the required listening volume can be low which is kind to your
ears.