DFRIGO User Manual |
Document subject to change without prior notice.
34
Numerical and/or selection validation function.
Function that will depend on the particular configuration.
Where applicable, this will be explained in the relevant
section.
On the main screen this enables you to enter the active
connections status. To exit this status, press this key again.
Function that will depend on the particular configuration.
Where applicable, this will be explained in the relevant
section.
8.3
Modes of Operation
The unit's drying capacity is controlled by managing the reactivation battery BR. (See
installation and maintenance manual)
The unit can operate in two different modes in which
the reactivation battery BR power output is managed in different ways.
These modes operate as follows:
8.3.1 Manual mode
If manual mode (MAN) is selected, the fan motors, speed reducer motor that turns the rotor
and the reactivation battery will start up immediately at 100% of their power output.
8.3.2 Automatic mode
In automatic mode (AUTO) the start-up of the fan motors and the speed reducer motor
depends on the H1 interlock and the operation of the reactivation battery is dependent on the
configuration of the control and interlock H2.
There are three control configuration types for the operational management of the
reactivation battery RB.
