fisair DFLEX 1100, Assembly Instructions Manual

Page: 14 / 53

DFLEX Assembly instructions |
14
5.4 Module 4 arrangement
Implementation steps:
- Locate the module labelled -4-
- Remove the transport guards.
- Suspend it using the eyebolts at the top, installed for this purpose.
- Make sure that the eyebolts have the following orientation as viewed from the
front and the side of the module -4- respectively:
- The minimum angle of the ropes with the eyebolts must be 45 °, therefore the
minimum height of the crane must be 175 mm.
- Place module -4- on module -2-, with section S4-2 perfectly aligned.
S4-2
Mín 45º