FIRST TEAM SPORTS Brute Supreme Aassembly Instructions Download Page 1

Page: 1 / 3

Bill of Materials

A (1) Bent Post

J (4) 3/8” Lockwasher

B (2) Backboard Brace

K (4) 3/8” Hex Nut

C (1) Nosecone

L (1) 3/8” x 6

½” Hex Bolt

D (1) T-Clamp

M (2) ½

” x 9 ” Hex Bolt

E (1) Saddle Clamp

N (4) 3/8” x 1 ½” Hex Bolt

F (2) ½” Hex Nut

O (4) 3/8” x 2 ½” Hex Bolt

G (2) ½” Lockwasher

H (5) 3/8” x 1 ¼” Hex Bolt

I (6) 3/8” Flatwasher

NOTE: Immediately unpack all components and cross check against bill of materials. Report any

shortages to First Team customer service at 1-888-884-6677.

First Team Sports, Inc | Brute

Summary of Contents for Brute Supreme

Page 1: ...Clamp M 2 x 9 Hex Bolt E 1 Saddle Clamp N 4 3 8 x 1 Hex Bolt F 2 Hex Nut O 4 3 8 x 2 Hex Bolt G 2 Lockwasher H 5 3 8 x 1 Hex Bolt I 6 3 8 Flatwasher NOTE Immediately unpack all components and cross ch...

Page 2: ...fiberglass Simply attach rim backboard and nosecone together as shown in Figure B using the bolts provided with the rim IF YOU HAVE A NON ACRYLIC BACKBOARD YOU DO NOT NEED RUBBER GASKETS DISCUSSED AB...

Page 3: ...r side of the nosecone Using the holes as a guide drill a 7 16 hole through the silver Brute post Finally permanently secure the nosecone to the Brute post using the 3 8 x 6 1 2 hex bolt and remaining...