intermix
DEUCE CONFERENCE TABLE
assembly instructions
Page 1: ...intermix DEUCE CONFERENCE TABLE assembly instructions...
Page 2: ...piece tops pull both halves together so there is no gap between them and the edges are flush Do not fasten work surfaces together at this time Place bases near chalk marks and orient them as shown La...
Page 3: ...ble is our 4 embly necting Part STEP THREE Align base assemblies precisely to the inside of chalk marks Mark hole locations for all base assemblies and set base assembly to the side when all holes ar...
Page 4: ...g plates are aligned with the pilot holes Fasten work surface to mounting plates by using eight 8 12 x 1 phillips pan head screws per base 1204 east sixth street telephone 800 983 4415 huntingburg in...
