8
2.
WARNINGS
General warnings
The equipment must be plugged on an electrical wiring compliant with the relevant standards in the
country (in France: NFC 15-100). This wiring must be protected from overcurrent, overvoltage and
ground defaults.
Connected equipment’s must be compliant with the EN 60950-1 Ed.2006 standard, or to their own
standards.
The power cable plug serves as a disconnection device and should be easily accessible.
Do not place the equipment close to a heating source or a humidity source.
The security of the system which integrates the equipment is the responsibility of the system assembler
only.
For your safety, the equipment must be TURNED OFF AND UNPLUGGED before any technical
intervention.
The security provided with this equipment is only guaranteed with a use in accordance with the specified
purpose. Only use the provided (MEAN WELL USA Inc, model GST18A12-P1J) power supply.
Never open your camera
Do not ever attempt to open your camera. There are indicators inside the camera, if you try to open it
your warranty will be void.
Do not open the camera, your warranty will be void.
Power circuitry
Use the camera with the voltage indicated. Using a different voltage may damage your camera and lead
to fire or electric shock.
Always use the supplied power unit.
