First Light C-BLUE One, User Manual

Page: 25 / 67

25
Table 11 - Camera LED indication and Description
Camera status Camera LED indication Description
Operational Purple blink The camera is operational
Operational cooling White blink The sensor is being cooled
Operational throttling
Double purple blink
The camera cannot reach the target
temperature
Safe Red blink An error has been detected. The detector
is turned off. The camera needs to be
rebooted.
Note: turned off led does not necessary mean that there is an issue with the camera. The camera can
be configured to switch off the led automatically once the boot is completed.
Power supply
C-BLUE One can be powered either using Power-over-CoaXPress
®
(PoCXP), with a compliant
CoaXPress
®
frame grabber, or using a dedicated power input, supplied in the delivery package.
Note: For optimal thermal performances, it is recommended to use the external power supply via
the LEMO® connector.
Via PoCXP
Refer to 8.3.6 for a complete description of the Power-over-CoaXPress
®
function.
External power supply
The provided power supply provides a stable 12 V DC, with at least 5 A of current available (60 W) that
allows to properly power C-BLUE One when cooling is enabled.
The mating connector is a LEMO
® FGG.0B.304.CLAD52Z
C-BLUE One back view.
Always use the power supply provided by First Light Imaging. Using another power
supply can damage the camera.