First Light C-BLUE One, User Manual

Page: 12 / 67

12
4. SPECIFICATIONS
Operating conditions
The operating conditions of C-BLUE One are as follows. Do not operate the camera beyond these
environmental specifications, as this may cause damage to the camera.
Table 4 – C-BLUE One operating conditions
Storage conditions
To avoid damaging the camera and altering its performances, the camera must be stored in the
following conditions. Make sure the camera is stored in its hard pelicase, to avoid any damage.
Table 5 - C-BLUE One storage conditions
Sensor specifications
C-BLUE One integrates a SONY IMX425LLJ-C or a SONY IMX426LLJ-C sensor.
Designed and manufactured by SONY, these sensors are high speed and low noise CMOS
monochrome sensors with a global shutter. These sensor can be used for numerous applications in
astronomy, Laser Guide Star (LGS) wavefront sensing, life sciences,
etc
.
Table 6 – Sensor specifications
* Spectral range is indicated for QE>40%
Parameter Values Units
Operation conditions
(Non-condensing condition)
Maximum
temperature 50 °C
Minimum temperature -10 °C
Humidity Non-condensing
Typical power consumption Without cooling 14 W
Power requirements
Voltage 100-240 Vac
Frequency 50/60 Hz
Parameter Values Units
Maximum temperature 70 °C
Minimum temperature -10 °C
Humidity Non-condensing
Parameter Values Values Units
Sensor IMX425LLJ-C IMX426LLJ-C
Sensor type CMOS CMOS
Shutter architecture Global shutter Global shutter
Spectral range 400 - 800* 400 - 800* nm
Resolution 1608 (W) x 1104 (H) 816 (W) x 624 (H) pixels
Pixel pitch 9 µm, ratio 1:1 9 µm, ratio 1:1 µm
Diagonal chip size 17.6 mm (Type 1.1) 9.2 mm (Type 1/1.7) mm