© 2020 Carrier
39
10.2
Select Field Protocol and Set Configuration Parameters
•
On the Web Configurator page, the first configuration parameter is the Protocol Selector.
•
Select the field protocol by entering the appropriate number into the Protocol Selector Value. Click
the Submit button. Click the System Restart button to save the updated configuration.
NOTE: Protocol specific parameters are only visible when the associated protocol is selected.
NOTE: If Modbus TCP/IP was selected and is used for the field protocol, skip Section
. Device
profiles are NOT used for Modbus TCP/IP.
•
Ensure that all parameters are entered for successful operation of the gateway. Find the legal value
options for each parameter under the Parameter Description in parentheses.
NOTE: If multiple devices are connected to the MB485ETH-CG, set the BACnet Virtual Server
Nodes field to “Yes”; otherwise leave the field on the default “No” setting.
Figure 41: Web Configurator Showing Protocol Selector Parameter
