background image

 LED                         : 5W

3W(Standby)

Specifica�on:

 

Ba�ery

     

       

:

LifePO4

 Discharge �me 

    

: 3Hours

 Charge �me 

         

: 20Hours

Installa�on:

Installa�on & Maintenance Instruc�on Manual

Moun�ng                : Ceiling mounted

Classifica�on          : C0=

D1

2.5 C90=D12.5

License No              : GMA-502029

Seprate the body and base.

Screw the base to the ceiling

.                                       

Connect the power cable to the terminal block on the base.                                          

. Push the body into the moun�ng base un�l a click is heared on each of base clip.                                       

Wide Body Exit Light

Important: safety informa�on

It is illegal for anyone, except for a licensed electrician to install or maintain this product. Before installa�on,

ensure that the electricity supply has been switched off and isolated. Installa�on must be carried out in

accordance with the relevant Australian and Interna�onal Standards.

Opera�ng Supply   : 220-240V / 50-60Hz

For first usage, power ON the unit for 24 hours to fully charge the ba�ery, Interrup�ng the mains supply will                             

dis

charge the ba�ery.                             

The emergency lamp must illuminate for at least 90mins a�er disconnec�on from the mains.                             

Press and hold Test Bu�on or Switch Off Mains Supply, check the emergency lamp is ON.                    

Release the Test Bu�on or Switch On Mains Supply, check the normal lamp is OFF (NON-Maintained opera�on)                  

Once a month, the unit will discharge itself for 30 seconds.                 

If the mains power supply does not switch off for 12 months, the unit will discharge itself un�l out of ba�ery, then          

will charge again.          

Products have a 3 year (from date of purchase) replacement warranty including ba�ery.          

Products have to be connected to permanent live power otherwise warranty will be void.

          

Must be installed by licensed electrician

.          

This warranty does not cover loss or damage by misuse, incorrect installa�on, incorrect voltage or non-authorized        

electrical connec�ons, adverse external condi�ons (such as power surges and dips, exposure to heat, corrosion 

        

etc).        

Products that have been altered in any way or used other than in accordance with instruc�ons are not covered by   

this warranty.

Compliance            : AS 2293.3-2005

Tes�ng

:

Self-Tes�ng

:

GMA-

502029

Note

:

Warranty

:

EXEXCM

Reviews: