Firetide HotPort 5020-LNK, Installation Manual

Page: 44 / 46

Weatherproof procedures
38
7. Wrap a layer of electrical tape (smooth side out, sticky side in) over the
mastic tape.
8. Wrap a second layer of electrical tape over the first layer of electrical tape.
The antenna connector is ready for installation in an outdoor environment.
Making a weatherproof cable to node connection
You need to make weatherproof two connections:
•
From the antenna cable to the lightning arrestor
• From the lightning arrestor to the node
To make a weatherproof cable to node connection:
1.
Gather the tools and materials to do the procedure.