-10-
-11-
Moun
•
Place the moun
te on the desired installa
a
where the holes should be drilled.
•
Drill two holes with a diameter of 5 millimetres.
•
Push the plas
to the holes.
•
Insert the screws into
the moun
te,
ten them
firmly into the plugs.
•
Place the smoke alarm
on the moun
bracket and secure it
by turning it clockwise.
•
Test the correct
opera
our
smoke alarm by
pressing the test
on. If no sound is
generated, the smoke
alarm is not
operly
and should not be
used!
Alarm silence facility
When the smoke alarm has detected smoke and turns into the alarm
mode, you can mute the alarm for approx 10±1 minutes by pressing
the cause of the alarm and make sure that the circumstances are safe.
Low ba ery mode
When the ba ery is running low, the smoke alarm will indicate this with
a r
e beep and flash for approximately 30 days. WARNING: This
smoke alarm is equipped with a non-replaceable ba ery. When this
warning occurs, replace the device as soon as possible! The acous
ba ery warning signal can be muted for ten hours by pressing the test
on. The smoke alarm is s
o detect smoke
when it's in this mode.
Fault warning mode
When the smok
operly, it will turn into the
fault warning mode. Try cleaning the smoke alarm (see paragraph
maintenance) or replace the smoke alarm!
Maintenance
•
Test this smoke alarm weekly for correct opera
est
facility. If the smok
orrectly, it will generate a loud
beep. Due to the loudness of the alarm, make sure that you always
stand at arm’s length distance from the unit when you are tes
the smoke alarm does not generate an acous
e
alarm must be replaced immediately!
•
Clean the smoke alarm at least once per month to remove dirt, dust or
debris. Use a v
acuum all sides
and covers of the smoke alarm. Do not remove the top cover of the
smoke alarm to clean it inside.
•
Do not a empt to repair this smoke alarm. If the smoke alarm shows a
damage related t
, it must be replaced!
•
Tr
en caused by dust or steam.
Recycling and disposal
The WEEE symbol means that this product and ba eries
must be disposed separately from other household waste.
When they reach their end of life, take them to a designated
waste c
t in your area to guarantee a safe disposal or
recycling. Protect the environment, human health and natural resources!
SMOKE ALARM
Opera
Visual (flash)
Acous
Normal 1 x per 40 seconds
None
operly
Test 1 x per second (3 x) / 1 x per seconds (3 x) / Device
is
being
tested
pause
of
1,5
seconds
pause
of
1,5
seconds
Alarm 1 x per second (3 x) / 1 x per seconds (3 x) / Device
has
detected
smoke
pause of 1,5 seconds
pause of 1,5 seconds
Wireless
alarm
None 2 x per seconds
Detected
other
devices
had
smoke
alarm
Alarm silence 1 x per 8 seconds None Smoke
alarm
is
muted
Low ba ery warning 1 x per 40 seconds 1 x per 40 seconds Ba ery is running low
Connected low ba ery warning
1 x per 3 hours
1 x per 3 hours
Ba ery of connected device is running low
Low ba ery warning
silence
None None Low
ba ery warning is muted
Fault
warning
None 1 x per 40 seconds
operly
Revision date: 04-03-2022
Document nr.: FP520V_Manual Revision nr.: A
Ceiling
Iden
a
Wireless test
2x per seconds for
5 minutes
2x per seconds for
10 seconds
Device is being connected test
，
FP520V USER MANUAL
Product type :
Smoke alarm
Item number :
FP520V
Manufacturer :
FIREPRO
138 – 140 Bayfi eld Road East,
Bayswater North, VIC, 3153, Australia
E-MAIL:
info@fi reproaus.com
Website:
altamonte.com.au
AS3786:2014+A1:2015+A2:2018
ESSENTIAL CHARACTERISTICS: PASSED
Nominal acti vati on conditi ons/ Sensiti vity, Response delay (response ti me) and
Performance under fire conditi on - Operati onal reliability - Tolerance to supply
voltage - Durability of operati onal reliability and response delay, temperature
resistance, vibrati on resistance, humidity resistance, corrosion resistance, electrical
stability
Download the Declarati on of Performance at www.altamonte.com.au
