REV. C Page 12
MT Burning Spur Fire Pits
TROUBLE SHOOTING
Symptom
Remedy
Fire pit won’t light
1. Bleed gas line.
2. Ensure all gas supply lines are turned ON.
3. Ensure there is not too much media overtop of burner; it can inhibit gas from flowing.
4. Check gas pressure.
Low flame
1. Ensure the base media is at least 1-inch in diameter and top media is no more than 1-inch over
top of burner.
2. Ensure all shut-off valves and key valve is fully open. See page 7; Fig. 5
3. Check gas pressure.
Water in my fire pit
1. Excess dust/sand material from media may be blocking the weep holes to relieve water.
Remove all media and unplug weep holes. Clean or install new media free of dust and dirt.
2. Ensure fire pit enclosure has proper drainage for water and proper ventilation to dry out.
ACCESSORIES
The following accessories are available from your local Firegear dealer/distributor.
Each accessory comes with a separate installation manual. Read each instruction thoroughly before installing.
Stainless Round Lid for 19” - 33” Pits
Models
: LID-19R2, LID-25R2,
LID-29R2, LID-33R2
Stainless Square Lid for 20” - 38” Pits
Models:
LID-20S, LID-26S, LID-32S,
LID-38S
Lava Rock 1” to 2”diameter
Model
: FG-LAVA-10 (10lb. bag),
FG-LAVA-40 (1 CUBIC FOOT)
LP Conversion Kits
See page 11 for available kits.
Glass Media
sold in 10LB (jugs).
See Firegear Outdoors catalog
for large reflective glass or broken
glass color choices.
Manual changes often occur, ensure to check the Firegear Outdoor
website for any recent updates and warranty information.
FOR TECHNICAL SERVICE, CALL:
Firegear Outdoors
14520 Delta Lane, Suite 105
Huntington Beach, CA 92647
Web Site: www.firegearoutdoors.com
(800) 966-8126