REV. 8-24-18 Page 3
Flexframe
If you are building a round paver enclosure the fl exframe will easily bend by hand in virtually any shape you perfer (Fig. 4).
CAUTION:
Wear gloves when forming the fl exframe by hand. The fl ex frame could “spring” back and pinch fi ngers.
In addition it is a good idea not to form the fl exframe until you are ready to lay it into place. This will allow your block or
pavers to hold it into place as you are completing the top row.
Note:
If you feel the need for additional strengthening then
add block adhesive to the same layer with the Flexframe for extra support.
Fig. 4
Bend the Flexframe by hand
STEP 3:
Form or lay the Flexframe inside the entire enclosure area. It is permissible to cut the Flexframe to fi t your
enclosure, however, it is not permissible to only use “just enough” pieces to support a pan (See Fig. 5 andf Fig. 6 for
examples).
NOTE
: Firegear Outdoors will not be liable for Flexframe installations not installed correctly. Once the Flexframe is in
place the installation is complete. Proceed to Step 4 for fi re pit installation.
Correct
Installation
Wrong
Installation
Fig. 5
Flexframe round installation
