FireFly FF-211 Instructions and Specifications
QUICK START
If you’re one of those folks that just wants to start using your new FF-211 now and read the instructions
later, it’s quite easy to be up and running in just minutes. Three easy steps are all that are necessary for
professional lightning simulation.
Connect lights (up to 1500 watts per channel) to the two power outlets on the rear of your FF-211.
1)
Connect your audio source (CD player, laptop, MP3 player, etc.) to the AUDIO INPUT jack on the
2)
rear panel. Then connect an amplifier and or amplified speakers to the 1/8” stereo AUDIO OUTPUT
jack on the rear of the lightning simulator.
Connect AC power.
3)
No other connections or adjustments are required for basic operation.
WHEN POWERING UP…
Upon power up, the FF-211 goes through a quick self-test and the Lights-Alive logo appears. After a total
of approximately three seconds, the system is fully functional. When you start playing the audio thunder
tracks, the lights will respond.
