15 |
P a g e
Use in a Comhub
In addition to being used in an installed system, your Base Station can be used
in a portable Comhub. Up to 5 channels are available through the Wireless
Base Station when used in this configuration.
Setting up Comhub mode, and the number of channels
To enter configuration mode:
1.
Unplug the Base Station, then plug it back in while holding the position 3
pairing button.
2.
Hold the pairing button until the green channel indicator LED turns on (see
"Mode/Channel Indicators" on page 10).
3.
The Base Station is now in Comhub mode.
4.
To set the number of available channels, press the pair button
corresponding to the number of channels desired (button 2 = 2 channels,
etc). The current number of channels is shown with a green LED on the
associated Mode/Channel Indicator (e.g. Port 5 = 5 channels).
5.
To exit configuration mode, unplug your base station from power, then
plug it back in. The Base Station is now ready to use.
