Figure 29: Programming option delay detector
alarm verification
Callout
Description
1
SW zone index to program
2
Access level
3
Control panel status
4
If blinking, the control panel is
working properly
5
Name of selected control panel
6
Select the option
7
Select the option
8
Select the option
DLY ALARM TIME (min)
If ON is selected for the option Delay to Alarm
you can enter the zone relevant delay to alarm
time. The possible value ranges from 0 (no delay)
to 9 minutes. The value may be incremented or
decremented in steps of 1 minute using the
Up
or
Down
keys.
4 Key – output
The output option, the
4
key in the programming
menu, activates the panel on the board output
programming screen. Use the output option to
select the type of panel on the board output,
followed by the programming procedure for that
Choose output
In this phase, the keypads and the keys have the
following functions:
Alphanumeric keypad
Use the alphanumeric keypad to enter the number
of SC output.
Cursor keys
Table 43: Cursor key functions in choose output
Key
Function
Up
Use to show the next output
category (SC-OC)
Down
Use to show the previous output
category
Right
No function
Left
No function
ESC and ENTER keys
Table 44: ESC and ENTER key function in smoke
delay
Key
Function
ESC
Use to cancel the operation and
return to the previous screen
ENTER
Use to accept the selection,
activate the output selection,
and activate the loop device
programming screen if the
output exists. Otherwise a
warning screen is displayed for 5
seconds "WRONG VALUE! Enter
the parameter again". After
5 seconds the user interface
moves back to the screen for
selecting the outputs.
When the output has been programmed, including
type and identification number, and the
ENTER
key
is pressed to accept the selection, enter the label for
the output.
Set As SC1
When set as YES, the relevant output will behave as
the Sounder Circuit 1 (SC1). This allows redundant
output circuits to drive site sounders. The default
setting is NO. Setting the option to YES will end the
programming sequence for that output.
FC503 and FC506 Addressable Fire Control Panels
54
Johnson Controls - CONFIDENTIAL
