FireBrick FB6602, User Manual

Page: 125 / 152

FireBrick FB6602 V1.24.093
configuration objects
110
proxy-arp boolean false Answer ARP/ND by proxy if we have
routing
ra ramode false If to announce IPv6 RA for this subnet
ra-dns List of IP6Addr - List of recursive DNS servers in route
announcements
ra-managed dhcpv6control - RA 'M' (managed) flag
ra-max (unsignedShort
4-1800) ra-max 600 Max RA send interval
ra-min (unsignedShort
3-1350) ra-min - Min RA send interval
ra-mtu unsignedShort As subnet MTU to use on RA
ra-other dhcpv6control - RA 'O' (other) flag
ra-profile string - Profile, if inactive then forces low priority
RA
source string - Source of data, used in automated config
management
test IPAddr - Test link state using ARP/ND for this IP
ttl unsignedByte 64 TTL for originating traffic via subnet
H.2.22. vrrp: VRRP settings
VRRP settings provide virtual router redundancy for the FireBrick. Profile inactive does not disable vrrp but
forces vrrp low priority.
Table H.29. vrrp: Attributes
Attribute Type Default Description
answer-ping boolean true Whether to answer PING to VRRP IPs
when master
comment string - Comment
delay unsignedInt 60 Delay after routing established before
priority returns to normal
interval unsignedShort 100 Transit interval (centiseconds)
ip List of IPAddr Not optional One or more IP addresses to announce
log string Not logging Log events
log-error string log as event Log errors
low-priority unsignedByte 1 Lower priority applicable until routing
established
name string - Name
preempt boolean true Whether pre-empt allowed
priority unsignedByte 100 Normal priority
profile string - Profile name
source string - Source of data, used in automated config
management
test List of IPAddr - List of IPs to which routing must exist else
low priority (deprecated)