Command line reference
92
G.1.8. Logout
logout
quit
exit
You can also use Ctrl-D to exit, or close the connection (if using telnet)
G.1.9. See XML configuration
show run
show configuration
Dumps the full XML configuration to the screen
G.1.10. Load XML configuration
import configuration
You then send the XML configuration, ending with a blank line. You would not normally import a configuration
using this command, as you can use the web interface, and tools like curl to load configtations. This command
is provided as a last resort for emergency use, so use with care.
G.1.11. Show profile status
show profiles
Shows profiles and current status.
G.1.12. Show RADIUS servers
show radius
show radius <IPAddr>
Shows details of RADIUS servers currently in use
G.1.13. Show DNS resolvers
show dns
Shows current DNS resolver list and status.
G.2. Networking commands
G.2.1. Subnets
show subnets
show subnet <integer>
You can list all current subnets, or details of a specific subnet. This shows the same information as the web
status pages for subnets.
