15
CONVERSION TO NATURAL GAS
Contact us for assistance: (866) 985-7877 | www.wtliving.com
WARNING!
To avoid the possibility of burns conversion should only be done when the patio
flame. Ensure burner is turned off. Turn gas off at source and disconnect the appliance before
beginning conversion.
WARNING!
Fire Glass may have sharp edges. Wear safety glasses and gloves when handling.
WARNING!
We recommend that the conversion be performed by a licensed gas fitter, and all
connections must be leak tested prior to operating the appliance.
2
3
4
Your e pit can be easily converted to Natural Gas by
following these steps:
1. Remove the
Fire Glass
from the
Burner
.
2. Remove the
Burner
from the enclosure. Take care not to damage or
kink the
Thermocouple Wire
.
using
3. Disconnect the
Stainless Steel Flex Connector
from the
(2)
Wrenches
.
4. Unscrew the
Propane O
from the inside of the
Burner
as
illustrated.
5. Replace the
Propane O
with the
Natural Gas O
supplied.
Note:
The
Air Shutter
has been factory set and does not need to be adjusted.
and tighten
6. Reconnect the
Stainless Steel Flex Connector
to the
using (2)
Wrenches
.
7. Place the
Burner
back into the enclosure.
8. Fill out the
Conversion Label
included with your
Conversion Kit
and
apply it to the inside of the
Control Panel Access Door
.
A leak test must be performed according to the leak testing instructions
found in the manual.
