Audio Command Center Series Manual —
P/N 51889:E1 6/8/2010
15
Product Features
Product Description
•
Two Form-C trouble relays:
System Trouble Relay - TB1
AC Power Loss Relay - TB7
•
35 mA Special Application (auxiliary power) output for addressable modules when interfaced
with the Fire•Lite MS-9200(E) or MS-9600 FACP or equivalent and End-of-Line power
supervision relays
•
Integral Dress Panel
•
Optional ACC-TR semi-flush trim ring
•
ACC-FFT Fire Fighter Telephone module for control and annunciation of up to 24 remote
telephone jacks
(installation in ACC-25/50ZST only)
•
Fire Fighter Handset (FHS-F) used to communicate over the telephone circuit connected to the
ACC-FFT
(ACC-25/50ZST only)
•
Fire Fighter Phone Jack FPJ-F provides plug-in location for the FHS-F
(ACC-25/50ZST only)
•
Remote Page Jack RPJ-F provides plug-in location for the FHS-F and All-Call paging
capability
(ACC-25/50ZST only)
•
Fire Fighter Handset Cabinet FHSC-RF (recess mount) or FHSC-SF (surface mount) is used to
store five Fire Fighter Handsets (FHS-F)
(ACC-25/50ZST only)
•
Optional FC-RM Remote Microphone (includes cabinet and FC-MIM Microphone Interface
Module). Refer to the FC-RM Product Installation Document #51247 for additional
information
•
Optional ACC-EPM External Page Module for interfacing to non-fire paging systems
•
Optional local playback speaker (FC-LPS)
•
System Status LEDs (refer to “Controls and Indicators” on page 23)
•
Master Command Bus output for All-Call paging control of Distributed Audio panels in non-
zone split systems
