Fiplex DHS37-R-DU, User & Installation Manual

Page: 30 / 45

DHS37-R-DU 26
Part 2 SOFTWARE
5 Introduction
Fiplex Fiber DAS can be fully configured and monitored through USB connection. Digital Master
unit receives through optical links monitoring and configuration data from remotes units. For this
reason, whole system can be fully configured and supervised from digital master unit.
6 USB Software
6.1 Software description (Digital Master)
If software has been successfully installed and connected to Digital Master (see section 7) status
screen will appear. In this screen, RF configurations parameters (channel frequencies,
bandwidth filter, gains / attenuation) and RF and optical links monitoring (RF input/output levels,
AGC status, optical link status) are shown.
At left side of webpage, configuration menus are shown:

Content

Status: whole RF configuration and monitoring parameters are shown. These
parameters are described in next section.

Tag: user can set a tag to ease repeater identification. For modifying the TAG, write
a new value in text field and click over Apply Changes link