5
EN -
WARNINGS
• Read thoroughly and stick closely to the
instructions and warnings.
• Before use, ensure that the mains voltage is
the same as the voltage indicated on the
data plate of the machine.
• Connect the grinder-doser only to 10 A
sockets that are efficiently earthed.
• Always remove the plug from the socket
before carrying out any maintenance or
cleaning of the grinder-dosers.
• Singlephase models are supplied complete
with cable and plug for connection to the
socket.
• Threephase models are provided with a
cable which must be connected to the
mains by a qualified electrician or a skilled
installation technician.
• Any tampering with the grinder-doser or
connections not complying with the above
indications invalidate the manufacturer’s
guarantee.
• Do not operate the grinder-doser without
coffee in the hopper.
• Never tamper with the machines anyway.
• For all interventions or tampering on the
machines, always apply only to the
authorized service centre.
• Never pull the power cable to remove the
plug from the socket.
• Only use the grinder-doser for the purposes
it is meant for.
• Position the grinder-doser a minimum of 5
cm from wails so as to allow good aviation.
• Keep the grinder-doser away from sinks
and jets of water.
• Never leave the grinder-doser unguarded
when switched on.
• This grinder-doser is not to be used by
people with limited mental or physical
abilities or by children with less than 8
years, or by people lacking in the
appropriate knowledge or experience,
unless properly supervised by someone
responsible for their safety.
• Children must be supervised to make sure
they don’t play with the unit.
• Cleaning and user maintenance shall not be
made by children without supervision.
• Never switch on the grinder-doser that
seems to be faulty.
• Use only original accessories and parts.
• To avoid the danger of fire, never cover the
grinder-doser.
• If the power cable is damaged, it must be
replaced by the manufacturer, its technical
department or a person with similar
experience in order to avoid any risk.
• Unplug the grinder-doser from the mains
when it is not in use.
• Let the grinder-doser cool down before
moving it.
• In the interest of safety, the grinder-doser
must always be considered as live.
• Take care, as the grinding blades may
continue rotating for a short while even
after the grinder-doser is switched off.
• Do not let liquids of any kind come into
contact with the internal or external parts of
the grinder-doser.
• Never put ground coffee in the hopper
intended only for coffee beans.
• Do not tamper with the grinder-doser.
• Do not touch the grinder-doser with damp
or wet hands or feet.
• The hopper must be fastened to the
grinder-dosers grinding system by means of
the relevant screw which must be inserted
in the threaded hole located on the upper
grinding blade holder and in the hole on
the neck of the hopper.
• The manufacturer cannot be held
responsible for bodily injury or damage to
property if these regulations are not
complied with.
If the coffee grinder is to remain inactive for a
long period, clean it carefully, dry the top
container and leave it open.
ATTENTION: Moving parts.
Summary of Contents for F4 E Nano
Page 2: ......
