background image

EN 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

            

 

1.4 Appliances with Combustion Engine 

 

time frame, keep absolutely away 
from the transmission area. 

 Open the bonnet of the appliance only 

with the engine off. 

 Do not insert your fingers into the 

steering column lock mechanism. 

 Do not remove the safety devices. 

 

  

 

 

1.5 Compliant and Intended Use 

Use this light waste vacuum cleaner only in 

accordance with the directions given by 
this operating manual. 

Before use, check the perfect condition and safe 
operation of the appliance and of the work 
equipment. Otherwise it is forbidden to use it. 

Before starting work, the operator must ensure that 
all the safety devices are correctly placed and 
functioning. 

In the standard version (with coarse filter) the 
appliance is suitable for suction of light waste (e.g. 
jars and beverage bottles, cigarette boxes etc.). 

This appliance is designed to vacuum clean 
outside environments. 

The appliance is not suitable to vacuum and 
collect dust harmful to health. 

No changes may be made to the 
appliance. 

Never vacuum explosive liquids, flammable gases, 
or acids and solvents. This includes petrol, paint or 
gasoline thinners that, together with the intake air, 
may form explosive vapours or mixtures, as well as 
acetone, acids and solvents that may corrode the 
materials of the machine. 

Reactive metal powders (e.g. aluminium, 
magnesium, zinc) form explosive gases together 
with strongly alkaline detergents and acids. 

Do not vacuum burning objects. 

It is

 forbidden to remain in the danger areas. 

It is 

forbidden to use the appliance in explosive 

environments. 

Keep the appliance away from any easily 
flammable substance. 

Protect the appliance against freezing. 

Any other use is considered improper use. The 
manufacturer does not accept responsibility for 
any damage caused by improper use. The risk 
resulting from such use is the sole responsibility of 
the user. Suitable use includes appropriate 
operation, maintenance and repairs as specified 
by the manufacturer. 

 

 

CAUTION

 

Before commissioning the appliance, 
read the operating manual supplied by 
the manufacturer of the engine. 

In particular observe the safety-related 
warnings.

 

 

HAZARD

 

Risk of explosion. 

 Refuel only with the engine off. 

 Only use the fuel stated in the engine 

operating instructions. 

 Do not refuel in closed 

environments. 

 Do not smoke or use naked flames. 

 Make sure that the fuel does not come 

into contact with hot surfaces.

 

 

 

 

WARNING

 

Risk of burns. 

 The gas exhaust outlet must not be 

closed. 

 Do not lean over the gas exhaust 

outlet. 

 Do not touch the gas exhaust outlet. 

 Before carrying out any maintenance 

or repair, let the appliance cool down 
sufficiently. 

 Do not touch the drive engine.

 

 

HAZARD

 

Risk of poisoning. 

 Exhaust gases contain carbon 

monoxide, and therefore are harmful 
and injurious to health and should not 
be inhaled. 

 It is prohibited to use the 

machine in closed environments.

 

 

 

 

 

 

HAZARD

 

Risk of shearing. 

 After switching off, the engine takes 

about 3-4 seconds to stop completely. 
During this

 

 

CAUTION

 

HAZARD

 

WARNING

 

HAZARD

 

HAZARD

 

Summary of Contents for ASPIRIK-P
















Reviews: