5. Troubleshooting
Q 1. No signal from remote sensor
A There can be many reasons for this, the following steps should help you
troubleshoot this problem.
1.1 Make sure that the batteries in the remote sensor are not depleted.
1.2 Reduce the distance between transmitter and receiver
1.3 Remove the batteries from the base station and the remote sensor and
reset the weather station in the right order as described in section 2 of
this manual.
1.4 This problem could also be a result of radio interference in your
neighborhood, try relocating the sensor and the base station
Q 2 Remote sensor drops off intermittently
A Possible interference from other sources, try relocating the sensor or the
base station. Radio device operation on the same frequency can also
cause interference.
Q 3 Temperature or the pressure is incorrect.
A Check/ Replace the batteries. Also make sure that the remote sensor is
not place near objects that can act as sources of heat or cold. Adjust the
relative air pressure value from a reliable source such as TV or radio
- 12 -
