EWT-4X
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
PARTS LIST / BREAKDOWN
Installing / Replacing Batteries
Main Unit (Ice Bucket)
1.
Locate the battery compartment on the bottom of the unit.
2.
Open the battery compartment.
3.
Insert 3 “AA” size batteries (not included) into the battery compartment. Make sure that the batteries are
installed according to the correct polarity markings in the bottom of the compartment.
4.
Replace the battery compartment door.
Sensor Unit (Wireless Temperature Sensor)
The icy WineBar’s Wireless Temperature Sensor comes with a battery already installed at the factory. Should the
Sensor Unit battery need to be replaced:
1.
Open the Sensor Unit by removing the battery lid with a small flat head screwdriver.
2.
Remove the exhausted battery and replace it with a lithium button cell “CR2032”
3.
When inserting the new battery make sure that the positive “+” terminal of the battery is upwards.
4.
Replace the battery lid.
BE CAREFUL WHEN INSTALLING BATTERIES INTO THE MAIN UNIT OR WIRELESS
TEMPERATURE SENSOR OF THE ICY WINEBAR. INSTALLING THE INCORRECT
BATTERIES OR REVERSING THE POLARITIES COULD CAUSE PERMANENT DAMAGES
TO THE PRODUCT.
Easy to Use (Operating instructions)
1.
Insert the Wireless Temperature Sensor into your opened bottle of wine.
2.
Turn on the icy WineBar by:
a. Turning the switch to the “ON” position on the Wireless Temperature Sensor
b. Pressing the “POWER” button on the Ice Bucket
3.
Set the Wine Setting according to the type of opened wine bottle by pressing the “SELECT” button. Keep
pressing the select button until the correct setting appears on the LCD & screen.
Red
17°C (63°F)
Rosé
15°C (59°F)
White
10°C (50°F)
Champagne
9°C (48°F)
www.lightninglever.com
�
�
�
�
�
�
�
�
�
�
�
A -
LCD
B -
Red LED
C -
Temperature Display
D -
Power Button
E -
Removable Ice Bucket
F -
Green LED
G -
Preset “Select Button”
H -
Main Unit Battery Compartment
I -
Sensor Battery Cover
J -
Sensor “ON / OFF” Switch
K -
Wireless Temperature Sensor Pickup
