Fimco Volt Edge 5164281 Instruction Manual Download Page 1

Page 1 

 

INSTRUCTION MANUAL 

www.fimcoindustries.com 

1000 FIMCO Lane, P.O. Box 1700, North Sioux City, SD  57049      

Toll Free Phone: 800-831-0027 : Toll Free Fax: 800-494-0440 

[5195301   

 

 

 

(11/19)] 

Instruction Manual for Volt Edge 20V max* Li-ion Battery Charger 

 

Maximum initial battery pack voltage (measured without a workload) is 20 volts. Measured under workload, nominal voltage is  

 

 18 volts. 

 

The label on your product may include the following symbols. 

 

 

 

 

V   

volts   

 

 

 

 

 

 

 

A    

Amperes   

 

 

 

 

 

 

  Hz 

Hertz 

 

 

 

 

Ah  

Amp hours 

 

 

 

 

 

 

  

Direct Current  

 

 

 

 

 

  

Safety Alert Symbol    

 

 
 

 

 

Wh  

Watt Hours 

 

 

 

 

 

 

~

    

Alternating Current   

 

 

 

 

 

Read Owner’s Manual 

 

Important Safety Instructions - Save These Instructions.

 

Save these instructions: This manual contains important safety instructions for battery chargers. 

 

Warning:

 

Before using charger, read and follow all instructions and cautionary markings on charger, battery pack and product using battery pack. 

 

Warning:

 

Shock hazard. Do not allow any liquid to get inside charger. 

 

Warning:

 

Burn hazard. To reduce the risk of injury, charge only designated Volt Edge 20Vmax batteries. Other types of batteries may burst caus-

ing personal injury and damage. 

 

Caution:

 

Under certain conditions, with the charger plugged into the power supply, the charger can be shorted by foreign material. Foreign mate-

rials of a conductive nature such as, but not limited to, steel wool, aluminum foil or any buildup of metallic particles should be kept away from charger 

cavities. Always unplug the charger from the power source when there is no battery pack in the cavity. Unplug charger before attempting to clean. 

 

Warning:

 

 

Do not attempt to charge the battery pack with any chargers other than the ones in this manual.   

 

 

 

 

 

 

 

 

 

 

The charger and battery pack are specifically designed to work together. 

 

The chargers are not intended for any uses other than charging designated Volt Edge 20Vmax Lithium-ion batteries. Any other uses may 
result in risk of fire, electric shock or electrocution. 

 

Be sure voltage selector is in correct voltage position before plugging in. 

 

For use in the U.S.A., the voltage selector switch must be placed in the 120 volt position. For use in countries, other than the U.S.A., the 
voltage selector may need to be placed in other than the 120 volt position. Confirm the voltage available at each country location before using 

this product. 

 

20V, 1A Lithium 

Battery Charger (5164281) 

Retain a copy of receipt for your Fimco Product. 

As it will be required to validate any warranty service. 

Volt Edge Chargers are warranted against manufac-

turer or workmanship defects for One (1) year from 

date of purchase for home owner usage and 90 days 

for commercial usage. 

Summary of Contents for Volt Edge 5164281

Page 1: ...an be shorted by foreign material Foreign mate rials of a conductive nature such as but not limited to steel wool aluminum foil or any buildup of metallic particles should be kept away from charger cavities Always unplug the charger from the power source when there is no battery pack in the cavity Unplug charger before attempting to clean Warning Do not attempt to charge the battery pack with any ...

Page 2: ...ice complies with NRCAN EEV CSA C381 2 17 May 2017 and Canada s Energy Efficiency Regulations This device complies with cETLus certification based on Conforms to UL STD 1310 Certified to CSA STD CC22 NO 223 Storage Recommendations The best storage place is one that is cool and dry away from direct sunlight and excess heat or cold Long storage will not harm the battery pack or charger Do not store ...

Page 3: ... is charged with the air temperature is between 50 F 10 C and 80 F 26 C 2 The charger and battery pack may become warm to the touch while charging This is normal and does not indicate a problem Ensure the vents are not blocked to allow cooling 3 The battery pack should be recharged when it no longer powers the equipment Do not continue to attempt using the battery if low power is indicated You may...

Page 4: ...anty you must 1 provide written notice to Fimco of the defect during the Warranty Period and within thirty 30 days after the defect becomes apparent or the repair becomes necessary at the following address Fimco 1000 FImco Lane North Sioux City SD 57049 and 2 make the Equipment available to Fimco or an authorized dealer within a reasonable period of time For more information about this Limited War...

Reviews: