PRESERVATION OF THE USER
The Use and Maintenance Manual must be stored in its special pouch close to the machine, protected from liquids and anything else that could
compromise its legibility.
ON CONSIGNMENT OF THE MACHINE
When the machine is consigned to the customer, an immediate check must be performed to ensure all the material mentioned in the shipping
documents has been received, and also to check the machine has not suffered damage during transportation. If this is the case, the carrier
must ascertain the extent of the damage at once, informing our customer service office. It is only by prompt action of this type that the missing
material can be obtained, and compensation for damage successfully claimed.
INTRODUCTORY COMMENT
A single-brush machine can only function well and work profitably if it is used correctly and kept in full working order, by carrying out the
maintenance operations described in the attached documentation. We therefore suggest you read this instruction booklet carefully and read it
again whenever difficulties arise while using the machine. If necessary, remember that our assistance service (organized in collaboration with
our dealers) is always available for advice or direct intervention.
IDENTIFICATION DATA
For technical assistance or to request replacement parts, always give the model, the version and the serial number (written on the relevant
plate).
TECHNICAL DESCRIPTION
The
Orbitizer
is a single-brush machine that uses the oscillation of an abrasive pad along with the chemical action of a water-detergent solution
to clean a wide range of floors and types of dirt.
The machine must only be used for this purpose
.
INTENDED USE
This single-brush machine was designed and built for cleaning smooth, compact floors in commercial, civil and industrial environments by a
qualified operator, in conditions that have been verified as safe. This single-brush machine is not suitable for cleaning carpets or rugs. This
single-brush machine is designed to be used exclusively in closed or covered environments.
ATTENTION:
the machine is not suitable for use in the rain, or under water jets.
IT IS FORBIDDEN
to use the machine in environments with an explosive atmosphere to clean dangerous powders or flammable liquids.
In addition, it is not suitable as a means of transport for people or objects.
SAFETY
Operator cooperation is paramount for accident prevention. No accident prevention programme can be effective without the full cooperation
of the person directly responsible for machine operation. The majority of occupational accidents that happen either in the workplace or whilst
moving are caused by failure to respect the most basic safety rules. An attentive, careful operator is most effective guarantee against accidents
and is fundamental in order to implement any prevention programme.
SERIAL NUMBER PLATE
Date: 18/01/2018
IP24
Model:
Made in ITALY
Part Number:
from 36V Li-ion Battery
Machine Weight: 12Kg
109930
ORBITIZER
PO: 10280490
S/N
220023155
Fimap SPA - Via Invalidi del Lavoro, 1
37050 S. Maria di Zevio Verona - ITALY
Input: 36 V
Power: 300W
Date: 18/01/2018
IP24
Model:
Made in ITALY
Part Number:
from 36V Li-ion Battery
Machine Weight: 12Kg
109930
ORBITIZER
PO: 10280490
S/N
220023155
Fimap SPA - Via Invalidi del Lavoro, 1
37050 S. Maria di Zevio Verona - ITALY
Input: 36 V
Power: 300W
12
11
10
9
1
2
3
4
5
6
7
8
The serial number plate is positioned on the lower part of the machine body, where the
general characteristics of the machine are displayed - the machine serial number in particular.
The serial number is a very important piece of information and should always be provided
together with any request for assistance or when purchasing spare parts. The serial number
plate contains the following:
1.
The commercial name of the machine, and the manufacturer's address.
2.
The machine serial number.
3.
The machine ID code.
4.
The name used to identify the machine
5.
The production date of the machine.
6.
The IP protection rating of the machine.
7.
The production order number of the machine.
8.
The degree of insulation of the machine.
9.
The electrical power of the machine.
10.
The weight of machine when ready for use (GVW).
11.
The type of electrical current used to power the machine.
12.
The nominal voltage of the machine (expressed in V).
11