The descriptions contained in this document are not binding. The company therefore reserves the right to make any modifications at any time to
elements, details, or accessory supply, as considered necessary for reasons of improvement or manufacturing/commercial requirements. The
reproduction, even partial, of the text and drawings contained in this document is prohibited by law.
The company reserves the right to make
any technical and/or supply modifications. The images are shown as reference only and are not binding as to the actual design and/or
equipment.
SYMBOLS USED IN THE MANUAL
GENERAL DESCRIPTION
Open book symbol with an "i":
Indicates the need to consult the instruction manual.
Open book symbol:
Tells the operator to read the user manual before using the device.
Covered place symbol:
The operations preceded by this symbol must always be carried out in a dry, covered area.
Information symbol:
Indicates additional information for the operator, to improve the use of the device.
Warning symbol:
Carefully read the sections preceded by this symbol meticulously following the instructions indicated for the safety of the operator
and the device.
Danger symbol (corrosive substances):
The operator should always wear protective gloves to avoid the risk of serious injury to the hands caused by corrosive substances.
Mandatory room ventilation symbol:
Informs the operator that the room must be ventilated while the batteries are being recharged.
Symbol indicating the compulsory use of protective gloves:
Indicates that the operator should always wear protective gloves, to avoid the risk of serious injury to his hands from sharp objects.
Recycling symbol:
Tells the operator to carry out the operations in compliance with environmental regulations in force in the place where the appliance
is being used.
Disposal symbol:
Carefully read the sections marked with this symbol for disposing of the appliance.
PURPOSE AND CONTENT OF THE MANUAL
The aim of this manual is to provide customers with all the information needed to use the machine in the safest, most appropriate and most
autonomous way. This includes information concerning technical aspects, safety, operation, downtime, maintenance, spare parts and scrapping.
The operators and qualified technicians must carefully read the instructions in this manual before carrying out any operations on the machine.
If in doubt about the correct interpretation of instructions, contact your nearest FIMAP Customer Service Center to obtain the necessary
clarifications.
TARGET GROUP
This manual is written both for operators and for qualified machine maintenance technicians. Operators must not perform operations that should
be carried out by qualified technicians. The manufacturer is not liable for damages resulting from failure to comply with this veto.
DEFINITION OF LEVELS OF WARNING
DANGER:
indicates an imminent dangerous situation that, unless avoided, will result in death or serious injuries.
WARNING:
Indicates a potentially dangerous situation that, unless avoided, could cause death of serious injury.
ATTENTION:
Indicates a potentially dangerous situation that, unless avoided, could cause slight or moderate injuries.
N.B.:
instructs the reader to pay particular attention to the topic that follows.
10