SERIAL NUMBER PLATE
11
10
9
8
7
6
1
2
3
4
5
The serial number plate is located at the rear of the steering column, and indicates the
machine's general characteristics, including its serial number. The serial number is a very
important piece of information and should always be provided together with any request for
assistance or when purchasing spare parts. The serial number plate contains the following:
1.
The weight of the batteries used to power the appliance (expressed in Kg).
2.
The IP protection rating of the appliance.
3.
The gross weight of the appliance (expressed in Kg).
4.
The identification code of the appliance.
5.
The serial number of the appliance.
6.
The name of the appliance.
7.
The nominal power consumed by the appliance (expressed in W).
8.
The maximum grade that the appliance can handle during work activities
(expressed in %).
9.
The year in which the appliance was manufactured.
10.
The nominal voltage of the appliance (expressed in V).
11.
The commercial name of the appliance and the manufacturer's address.
TECHNICAL DATA
TECHNICAL DATA
U/M
SI
[KMS]
MMg
MMg
Cylindrical
MMg
Orbital
Nominal input power [IEC 60335-2-72; IEC 62885-9]
KW
1,93
1,83
1,61
Nominal power input, versions with side brush [IEC 60335-2-72; IEC 62885-9]
KW
2,03
2,01
-
Theoretical maximum productivity
m
2
/h
4530
3870
4260
Working width [IEC 62885-9]
mm
755
645
710
Working width with the side brush
mm
850
940
-
Squeegee width
mm
880
880
880
Nominal power of central brush head motor [IEC 62885-9]
W
500
450
680
Total width of brushes [IEC 62885-9]
mm
2x400
2x616
-
Total width of the abrasive pad [IEC 62885-9]
mm
-
-
1x710
Number of rotations of central brush head motor
rpm
140
550
2000
Weight exerted by the central brush head
kg
36÷110
30÷40
42÷100
Nominal power of the side brush motor
W
100
90
-
Total width of the side brush
mm
1x260
2x330
-
Number of rotations of side brush motor
rpm
150
65
-
Weight exerted by the side brush
kg
10
5
-
Nominal power of traction motor [IEC 62885-9]
W
520
520
520
Maximum transfer speed [IEC 62885-9]
km/h
0÷8
0÷8
0÷8
Gradeability when working with GVW (maximum period of use 20 seconds)
%
7
7
7
Gradeability during transfer with full solution tank only (maximum period of use 20
seconds)
%
10
10
10
Gradeability during transfer with both tanks empty
%
18
18
18
Nominal power of suction motor [IEC 62885-9]
W
410
410
410
Maximum vacuum [IEC 62885-9; IEC 60312-1]
KPa
11,8
11,8
11,8
Solution tank capacity [IEC 62885-9]
l
110
110
110
Recovery tank capacity [IEC 62885-9]
l
110
110
110
Debris hopper volume [IEC 62885-9]
l
-
8
-
Minimum inversion corridor [IEC 62885-9]
mm
2077
2077
2077
Machine dimensions (length - width - height)
mm
1602
881
1242
1602
881
1242
1602
881
1242
8