LX500 Jan. 2002
Page 19
3.2.5
RTE (route)
LX 500 route consists of maximal 10 waypoints. The memory capacity is 100 routes. Using of route will bring
following advantages:
•
Useable statistic during the flight
•
Safe navigation from waypoint to waypoint (without selection)
•
Simply to modify the route during the flight
•
Automatic change over after reaching of waypoint
The menu structure is practically the same like by APT and WPT.
The only differency is the header where you can find
name of the actual waypoint and its position in the route
.
DTK is always set equal to BRG after selection. DTK can be changed during the flight.The graphical screen can
make a good job for the pilot, aproaching to the waypoint
The waypoint marked 0 is always the initial point of the route.
3.2.5.1
RTE select
The selection is done rotating
up/down
selector, RTE number and used waypoints will be shown. A
NOT PROG
message will inform you that the route has not been programmed.
3.2.5.2
RTE edit
To modify the route use EDIT function. INVERT
Y
simple changes the numerical order of the waypoints.
name
RTE nr. 2 point 0
