A
A-7
Print Options
More information about print options
The following sections provide additional information about print options. See the
table above for information on the settings, requirements, and constraints in effect for
these options.
Combine Separations
The Combine Separations option specifies whether to combine color separations
created in desktop publishing applications on a single page to simulate printing on a
press from film separations. It allows you to proof overprinting, trapping, and other
four-color printing effects before having film separations created. It also enables you to
combine Desktop Color Separations (DCS) format files to print them at full resolution
instead of printing the low-resolution master file.
Your job must have been printed as color separations or DCS format when you printed
it from your application. If you did not print the job in this manner, the Combine
Separations option has no effect.
N
OTE
:
This option is supported only for Adobe PageMaker and QuarkXPress.
Page Range
The operator can specify a page range override, but this range applies only to the pages
included in the active job. For example, if a user specifies Odd for Page Range in the
original job, even if the operator specifies a Page Range override of All, only the odd
pages of the original document are printed (“all” the odd pages).
Paper Source
If you choose the Auto Select setting, the copier prints from any tray containing the
paper size needed for the job. This setting also allows the copier to automatically
switch between trays, if the current tray becomes empty, while continuing to print.
