manualshive.com logo in svg

Fiery ZX-40, Printing Manual

Share
Download
Fiery ZX-40 Printing Manual Download Page 49

5

5-1

Using the Fiery Downloader

The Fiery Downloader

™

 allows you to send PostScript, EPS, and PDF files directly to 

the Fiery ZX without using the application they were created in. It also enables you to 
manage printer fonts on the Fiery ZX. 

You can use the Fiery Downloader from a remote workstation as well as from the 
Command WorkStation. Fiery Downloader requires a network connection—you 
cannot use the Fiery Downloader with the parallel port. For information on supported 
networking protocols, see Getting Started.

N

OTE

:

The Windows and Mac OS versions of the Fiery Downloader are fundamentally 

the same; differences are noted in this chapter. Where a window or dialog box is 
illustrated, the Windows version comes first, followed by the Mac OS version.

Using the Fiery Downloader

You can use the Fiery Downloader to: 

• Send PostScript, EPS, and PDF files to the Fiery ZX

• Check the status of the Fiery ZX

• Manage the PostScript printer fonts stored on the Fiery ZX hard disk (this feature 

requires use of the Direct connection)

N

OTE

:

The Fiery Downloader was designed specifically for the Fiery ZX; you cannot 

use it with any other printer. 

T

O

 

VIEW

 

INFORMATION

 

WITH

 

THE

 F

IERY

 D

OWNLOADER

:

1.

Launch the Fiery Downloader.

2.

Select the Fiery ZX in the Chooser window and click OK (Windows) or Connect 
(Mac OS).

Chapter 5:
Downloading 
Files and Fonts

Summary of Contents for ZX-40


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands