7
7-10
Fiery Spooler
N
OTE
:
Raster jobs in the RIP area that are waiting to print (Icon 2) cannot be
manipulated by job commands.
Print area
The job icon in the Print area is as follows:
The Print area, also referred to as the Printed queue, contains jobs that have already
been printed. These jobs were assigned the Print destination (white printer icon in the
Spool or RIP areas) without any Hold instructions; therefore, they all have white icons.
N
OTE
:
A job row that appears in light red indicates that an error occurred while
printing the job. To see the error, double-click anywhere in the row.
While it is printing, a job consists of PostScript or PCL and raster data. The raster data
in RAM is not cleared until memory is needed to rasterize the next job. As long as the
raster data is intact, the job can be reprinted from the Printed queue. Printed jobs are
represented by a white PostScript icon (Icon 1). If the job was printed from a held
raster job (in the RIP area), the raster data in the RIP area remains and can be used to
reprint the job after the raster data has been cleared from the Printed queue.
Print area icon
What it indicates
How long you see the job
1
PostScript or PCL data
only—raster data has been
deleted
Until the job limit is reached
